2.1 BASIC OPERATION
2.1.3 HOW TO USE
1
Choose forward or reverse with the forward/reverse lever, and
turn on the trigger switch.
• Trigger switch pull-in operation may delay the startup of rotation for a moment,
which is not a failure.
• In case of quick ON/OFF, the rotation startup will be late a little for that.
• If you keep pulling the trigger switch to make rotations continuously, the tool may
come to an error (EA) stop automatically because the recordable data per work
exceeds the upper limit.
• The operating temperature range of lithium-ion battery packs is 0 °C (32 °F) to
40 °C (104 °F).
If a cold battery pack that is 0 °C (32 °F) or below is used as it is in cold regions
etc., the tool may not operate normally. In this case, before use, leave the battery
pack in a place that is 10 °C (50 °F) or above for 1 hour or more to raise its
temperature. After the temperature has risen, use the battery pack.
For about 1 second just after a battery pack is
attached, trigger switch pull-in operation is not
accepted.
CAUTION
• Wait for the motor to stop, before operating the forward/reverse lever.
Operating it while the motor has not stopped completely will cause a failure.
EN
- 23 -
Continued to the next page
Forward
Reverse