Publicité
Les langues disponibles
Les langues disponibles
2.2 USING THE TOOL MANAGER SOFTWARE
2.2.5 CONNECTING/DISCONNECTING THE TOOL
Connect the Tool
1
If power to the tool is not on, pull the trigger switch of the tool to
turn on the power.
2
Connect the tool to your PC or tablet with a USB cable.
CAUTION
• Hold the plug and insert or remove it straight. If you insert it diagonally, the
connector will be deformed and cause a malfunction.
3
When the pairing dialog is displayed, select [Pair Tool].
Note
• If there is no serial number information in the tool, select a tool's model number and
enter the serial number from the pairing dialog.
(The serial number is printed on the tool's color plate.)
EN
- 35 -
Continued to the next page
Color plate
Publicité
