Panasonic EYFNH1XC Instructions D'utilisation page 20

1.7 TOOL SETUPS BEFORE USE
1 Hold the forward/reverse lever
in the center to keep it in a
switch lock position.
2 Attach a socket.
① Remove a rubber ring and a pin from
the socket.
② Insert the socket into the tool.
(Align their hole positions.)
③ Reversing the procedure ①, attach the
pin and the rubber ring.
• Be sure to put the rubber ring so that the
pin will not come out.
• The retainer ring (C-ring) is for temporary fixing. Be sure to use the pin and the rubber ring
to fix the socket.
• If you use a socket that is worn or deformed, an anvil of the retainer ring (C-ring) type may
not be inserted.
3
Aligning the alignment marks,
attach the battery pack.
Slide it until the red label is out of sight,
and make sure that it is fixed and won't
come off.
EN
Switch lock position
Red label
- 20 -
Center
Rubber ring
Groove
Pin
Alignment mark
Click