Panasonic EYFNH1XC Instructions D'utilisation page 37

2.2 USING THE TOOL MANAGER SOFTWARE
2.2.5 CONNECTING/DISCONNECTING THE TOOL
Disconnect the Tool
Unplug the USB cable from the tool or the connected PC or tablet.
CAUTION
• If the communication lamp (blue) on the tool is blinking fast (0.1 s cycle), this means
that data is being communicated. Do not disconnect the USB cable, otherwise there
will be a risk of damaging the data being communicated.
• Do not work with the USB cable connected with the tool.
• Before use for work, close the USB connector cover securely by pushing it all the way
in.
EN
- 37 -