Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
TECHNICAL DATA
VIEWING AREA
POWER SUPPLY
LIGHT STATE (DIN EN 379)
DARK STATE (DIN EN 379)
SWITCH TIME (DIN EN 379)
DELAY TIME (DARK TO LIGHT)
OPERATING TEMPERATURE
STORAGE TEMPERATURE
USE
HEADGEAR ADJUSTMENT
• The headgear size can be manually adjusted to fit different wearers.
• Slightly rotate the knob on the back of the headgear, and adjust the width of the headband, so as to feel comfortable.
• The sides of the mask accommodate 3 holes for adjusting the viewing angle. Place the reference pins of the headband in the
most suitable hole. The ideal viewing angle is the one where the filter is perpendicular to the welding surface.
FILTER SETTINGS
Legend
1. MODE
2. SET
3. LED
4. DOWN
5. UP(T)
6. Interior screen guard
7. Lithium battery
8. Arc sensors
9. Solar Cell
10. Auto-darkening filter
Battery
• Before use, check the battery charge.
Battery fully charged
Battery almost exhusted
• To replace remove the battery compartment cover (7) and use 1 lithium battery R2450
Worn batteries must be disposed of in accordance with local regulations
98 x 80 mm
SOLAR CELL, Lithium battery R2450
4
Weld L: 5 – 8 Weld H: 9 – 13
1/1000s
0.1s ÷ 2.0s
-5°C +55°C
-20°C +70°C
not flashing
flashing
EN
9
Publicité
