Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
TROUBLESHOOTING
FAQs
Filters do not darken, or flickers
Reaction is slow
Filter is not clear
The mask slips
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should
be collected separately from other types of urban waste at the end of its useful life."
Any user who is going to dispose of this tool can:
• deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
• return it to the dealer upon purchase of a new, equivalent item of equipment;
• in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment and
human health. Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give
way to the application of such fines as provided for under current regulations.
WARRANTY
This meter is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month warranty for
professional use or a 24-month warranty for nonprofessional use. We will repair any breakdowns caused by material or
manufacturing defects by fixing the defective pieces or replacing them at our discretion. Should assistance be required once or
several times during the warranty period, the expiry date of this warranty will remain unchanged. This warranty will not cover
defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition, this warranty will no longer be valid if any
changes are made, or if the meter is forced or sent to the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
DECLARATION OF CONFORMITY
Declaration of conformity: The declaration of conformity is available by connecting to the www.beta-tools.com website
BETA UTENSILI S.p.A.
Via A. Volta 18,
20845 Sovico (MB)
ITALY
Date 01/03/2023
CAUSES
Protector is damaged
Arc sensor is not clear
Welding current is too low
Battery is low
Ambient temperature is too low
Sensitivity setting is too low
Protector is stained
Protective film has not been removed
Filter lenses have stains
Ambient light is poor
Dark shade has not been set correctly
Headband has not been adjusted
SOLUZIONS
Clean or replace it
Clean sensor surface
Adjust sensitivity to maximum
Replace battery
Do not use below -5 °C
Raise sensitivity properly
Clean or replace protector
Remove protective fi lm
Wipe both sides of fi lter lenses
Adjust light in workplace
Set dark shade correctly
Adjust fixed nuts on headgear
EN
11
Publicité
