ABUS Security-Center Eyseo TV7600 Instructions D'installation page 75

4. PRIVACY SET – SAVE
To save the data after set the privacy masking zone, move joystick to the rightwards
when the cursor is on SAVE. After saving of data, the cursor automatically jumps to
PRIVACY NO.2 to prepare the next privacy masking zone.
5. PRIVACY SET – EXIT
Move joystick to the right to return to main menu.
H. PATTERN SET
8 programmable patterns are available with 16 characters for title.
After setting the data of each pattern, 81~88 + PRESET buttons are working as Pattern # 1~8.
• Maxpro protocol provides 6 quick operation keys (80~85 + preset) for patterns, but it is
possible to set up to pattern #8.
PATTERN SET
PATT NO
PATT TITLE:
DATA FILL
SAVE
EXIT
1. PATTERN SET – PATT NO.
Up to 8 programmable user-defined patterns are available to set by joystick movement.
2. PATTERN SET – PATT TITLE
To set pattern title, select up to 16 characters moving Joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right and
ZOOM WIDE button to move to the prior character from right to left.
Space is displayed when
only for the reference of menu controller.
3. PATTERN SET – DATA FILL
Press FOCUS FAR button to start recording process. The dome saves all joystick
movements to its memory during this time. A number on monitor shows the percentage
of filled memory. Press FOCUS FAR button again in order to escape.
4. PATTERN SET – SAVE
To save the filled data, move joystick to the rightwards when the cursor is on SAVE.
This may take several seconds. Then the cursor moves to the following pattern no in
order to prepare next pattern.
5. PATTERN SET – EXIT
Move joystick to the right to return to main menu.
: 01
: PATTERN01□□□
: 100%
appears. Pattern title is not displayed on the monitor, it is
75
DEFAULT SETTING