ABUS Security-Center Eyseo TV7600 Instructions D'installation page 53

C. Embedded Mount Type
TV7607 (Embedded mounting frame) is not scope of delivery.
Embedded mount frame is for suspended ceilings with at least 14 cm distance between
structural slab und and ceiling. Only the bubble of the camera will be visible.
1. Prepare an Ø190mm hole in the ceiling board.
Fix the safety wire to a suspension to prevent camera from falling.
Other side of safety wire is fixed to the safety wire hole. (FIG.16)
2. Fold the Lock Levers and insert the Bracket into the Ceiling Hole.
Fix the Bracket to the ceiling using the driver. (FIG.17)
3. Hereafter installation is the same way as the Ceiling Mount Type.
(Refer to the page 51 and 52)
53