Pentair AUTOTROL 255 LOGIX 740 Guide De L'utilisateur page 4

User Guide 255 / LOGIX 740-760
1 . Generalities
Caution: 
Before handling the system, each user must read and understand the instructions in this document. The safety
instructions must be observed. Retain this document for future reference.
1.1. Scope of the documentation
The documentation provides the information necessary for appropriate use of the system. It informs the user to ensure efficient
execution of operation or maintenance procedures. This document is not aimed at the installer.
Visit our website https://www.pentair.eu/product-finder/product-type/control-valves to download the installer manual.
1.2. Release management
Release Date
A 07.03.2016
B 26.06.2018
C 09.10.2019
D 16.01.2023
1.3. Manufacturer identifier, product
Manufacturer: Pentair International LLC
Avenue de Sevelin 20
1004 Lausanne
Switzerland
1.4. Applicable norms
This product complies with the following guidelines:
• 2014/35/UE: Low Voltage Directive;
• 2006/42/EC: Machinery Directive;
• 2014/30/UE: Electromagnetic compatibility;
• 2011/65/EC: Restriction of use of certain hazardous substances in electrical and electronic equipment (RoHS). Meets the
following technical standards.
• UNI EN ISO9001.
And meets the following technical standards:
• IEC/EN 60335-1;
• IEC 61010-1;
• EN 55014-1;
• EN 55014-2;
• EN 61000-3-2: 2006 + A1: 2009 + A2: 2009;
• EN 61000-3-3: 2008;
• EN 61000-6-2: 2005;
• N 61000-6-3: 2007 + A1: 2011;
• EN 61326-1.
1.5. Limitation of liability
Pentair Quality System EMEA products benefit, under specific conditions, from a manufacturer warranty that may be invoked
by Pentair's direct customers. Users should contact the vendor of this product for applicable conditions and in case of a
potential warranty claim. Pentair accepts no liability for equipment installed by the user upstream or downstream of Pentair
products, as well as for process/production processes which are installed and connected around or even related to the
installation. Disturbances, failures, direct or indirect damages that are caused by such equipment or processes are also
excluded from the warranty. Pentair shall not accept any liability for any loss or damage of profits, revenues, use, production,
or contracts, or for any indirect, special or consequential loss or damage whatsoever. Please refer to the Pentair List Price to
know more about terms and conditions applicable to this product.
4 / 36
Authors
STF/FLA
BRY/FIM
STF
BRY/FIM
Product:
Description
First edition.
Address change.
Corrections.
Website.
Autotrol 255 Logix 740-760
Ref. MKT-UG-001 / D - 16.01.2023