Technical Data; Applications - Max Cordless SuperFramer GS690CH Guide D'utilisation Et Manuel D'instructions

4.

TECHNICAL DATA

NOISE
A-weighted single-event sound power level ------ LWA, 1s, d
A-weighted single-event emission sound pressure level at work station------ LpA, 1s, d
Uncertainty
These values are determined and documented in accordance to EN12549:1999+A1:2008.
NOTE: These values are tool-related characteristic values and do not represent the noise generation at the point of use. Noise at the point
of use will for example depend on the working environment, the workpiece, the workpiece support, and the number of driving operations.
In addition, reference should be made to noise reduction measures.
NOTE: Workplace design can also serve to reduce noise levels, for example placing workpieces on sound-damping supports (see also ISO
11690-1).
VIBRATION
Vibration characteristic value
Uncertainty
These values are determined and documented in accordance to ISO 28927-13
NOTE: The vibration emission value above is a tool-related characteristic value and does not represent the influence to the hand-arm-sys-
tem when using the tool. Any influence to the hand-arm-system when using the tool will for example depend on the gripping force, the con-
tact pressure force, the working direction, the adjustment of energy supply, the workpiece, the workpiece support.
5.

APPLICATIONS

Floor, wall and roof framing
Subflooring
Roof and wall sheathing
Fencing
6. ABOUT PRODUCTION YEAR
This product bears production number at the lower part of the grip of the main body. The two digits of the number from left indicates the
production year.
(Example)
1 8 8 2 6 0 3 5 D
Year 2018
NOTE: The triangle symbol marked as " " following its tool serial number indicated that safety yoke is equipped with this tool.
GS690CH, GS683CH-EX
2
4.04m/s
1.5m/s
2
GS690RH, GS683RH-EX
2
3.84m/s
2
GS690CH, GS690RH,
GS683CH-EX, GS683RH-EX
103.9dB
100.5dB
3dB