Important Notices; Transport And Storage; Transport Of Second-Hand Appliances - Cattani TURBO Smart A Manuel D'utilisation

• Important notices

• Transport and storage

• Transport of second-hand appliances

• Important notices
• Appliances are guaranteed for one year from the date of sale, provided that the warranty slip is
returned to the manufacturer with date of sale, retailer's and customer's name.
• Warranty and manufacturer's liability cease in case appliances are treated with products which
are unsuitable or different from those recommended by the manufacturer and also in case
appliances are improperly used or tampered with operations of any kind carried out by people
who are not authorized by the manufacturer.
• The manufacturer, concessionaires, agents and authorized technicians are at customers'
disposal for advice and assistance and to supply literature, spare parts and anything useful.
• The manufacturer reserves the right to modify the products for improvements, for technical,
normative and functional reasons or for problems due to the availability of products or semi-
fi nished products, without prior notice.
• Our updated manuals are available on the web site www.cattani.it. We recommend they are
consulted especially for updates about safety.
• Turbo-Smart is a EEE device, therefore it is subject to the WEEE (Waste of Electrical and
Electronic Equipment) regulations.
• Transport and storage
• Packed appliances can be transported and stored at a temperature ranging from -10 °C to +
60 °C.
• Packages must be kept away from water and splashing and cannot tolerate humidity >70%.
• Packages with the same weight can be stored in piles of three only.
• Transport of second-hand appliances
• Before packing, we suggest to cleanse and disinfect the aspirator with Fast & Steril 3 (refer to
the paragraphs "Signals and warnings" and "Routine maintenance").
• Drain all tubes and ports (including those that convey fl uids from inside machine) and possible
residual fl uids (including disinfectant), which can damage the control panel. Remove the amalgam
collection canister, add the disinfectant, place and then lock the hermetically sealed lid on the
canister. Once the suction unit is dry –both externally and internally- close all of the inlets and
outlets with the purpose-made caps, fi t a new (and empty) amalgam collection canister to the
unit, and wrap both the suction unit and control panel separately in plastic, in order to ensure that
these items are waterproof.
• Place the machine into a polyethylene bag, seal and pack it in 3-layer corrugated board.
47