Instructions For Communication Settings Zigbee (Wireless) - Cattani TURBO Smart A Manuel D'utilisation

• Instructions for communication settings
Zigbee (wireless)
Set the network address of the machine
(min 100) (max 110).
Enter the Zig-bee communication key (ETRX2 USB)
in the USB port of the computer and launch the
display program.
Install the SMART SYSTEM MONITOR program
(supplied by Cattani) in the computer.
Once the program is launched, the com-
pany's logo will appear for 10 seconds
followed by the main menu.
Click on the SERVICE menu so that you
can access the device search page.
41