Publicité
Les langues disponibles
Les langues disponibles
The following is our recommended painting procedure:
2
1. Do not use strong solvents for cleaning the heads.
2. Use a Flexi-Plastic Primer – one coat only.
3. For colour, use an Acrylic with Flex additive – maximum of 2 coats.
4. If required, use a Clear Acrylic final coat – single coat only.
8. Troubleshooting
In purchasing this parking aid, you have acquired a product which has been designed with state-
of-theart technology and is operationally reliable.
Nevertheless, problems or faults may occur.
For this reason, the following is a description of how you can eliminate possible malfunctions
yourself.
Always adhere to the safety instructions.
Error
The parking aid does not
switch on.
Repairs other than those described should only be carried out by an authorised
specialist.
It is forbidden to dispose of it in the domestic waste!
26
Possible cause
The reverse gear is not
engaged.
No ignition voltage.
Wrong cabling.
The fuse is defect.
The lateral slider is in the
"OFF" position.
Solution
Engage the reverse gear
Switch the ignition on.
Check the plug connections
and the flat fuse of the
voltage supply.
Put the slider on "ON, Lo
or Hi".
Publicité
