Télécharger Imprimer la page

RedMax BC250S Manuel D'utilisation page 7

Publicité

Les langues disponibles

Les langues disponibles

BCZ250S/BCZ260S/BCZ260TS
3. Warning labels on the machine
(1)
(2)
(4)
(5)
(6)
(7)
(8)
(3)
USA
(9)
4. Symbols on the machine
For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, please be careful not to
take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: AIR CLEANER COVER
(c) The direction to open the choke
Position: AIR CLEANER COVER
(d),(e) Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with trimmer
cord.
Position:
(d) CUTTING ATTACHMENT GUARD
(e) SHAFT TUBE
US-4
Symbols
(1) WARNING! Grass Trimmer can be dangerous!
Careless or incorrect use can result in serious
or fatal injury to the operator or others. It is
extremely important that you read and understand
the contents of the operator's manual.
(2) Please read the operator's manual carefully
and make sure you understand the
instructions before using the machine.
(3) Risk of blade thrust if the cutting equipment
touches an object that it does not
immediately cut. The product can cut off
body parts.
(4) Always wear:
• A protective helmet where there is a risk
of falling objects
• Approved hearing protection
• Approved eye protection
(5) Always wear approved protective gloves.
(6) Wear sturdy, non-slip boots.
(7) Watch out for thrown objects and
ricochets.
(8) The operator of the machine must ensure,
while working, that no persons or animals
come closer than 15 meters.
(9) Arrows which show limits for handle
positioning.
IMPORTANT
If warning label peel off or become soiled and
impossible to read, you should contact the dealer
from which you purchased the product to order new
labels and affix them in the required location(s).
WARNING
Never modify your grass trimmer.
We won't warrant the machine, if you use the
remodeled grass trimmer or you don't observe
the proper usage written in the manual.
EMISSION CONTROL
An emission control label is located on the engine.
*1: The year will be changed every year of manufacturing.
*2: The first letter of the family name will be changed every year of
manufacturing.
*3: SP : Sealed tank made of HDPE or PE.
2014
54GB
25

Publicité

loading

Ce manuel est également adapté pour:

Bcz260sBcz260ts