Publicité
Les langues disponibles
Les langues disponibles
5
SYSTEM EXPANSION
5.1 GENERAL:
You can register up to a maximum of 4 cameras on the DVM-750 parent unit. You
can then choose to select the video + audio from a single camera or you can view
the video from all cameras simultaneously while listening to the sounds from the
desired camera.
Attention: it's NOT possible to automatically switch to the camera where a baby is
crying.
Additional cameras are available via the customer service of Alecto at phone
number 073 6411 355 (NL), 03 238 5666 (B), 0180 503 0085 (D) or via www.
alecto.nl
5.2 TO REGISTER, DEREGISTER AND ASSIGN NAMES:
1a
1. touch the screen in a random
spot, press Menu and then touch
Cameras
2. to register:
- touch at point 2 to register a
camera
- switch on the new camera and
press and hold the
button of
that camera for 10 seconds
3. to deregister:
- touch here to deregister a camera and confirm this by touching 'Yes' in the
following screen
4. to assign a name:
- touch at point 4 to assign a personal name to the camera
- first touch 'YES', then touch 'Del' to delete the old name, enter the new name
by touching the blue letters/digits in the display (maximum 8 characters) and
finally touch 'Save' to save the new name
Press the Home button to exit the menu and to return to the standard display.
1
1c
b
Pair Additional
Pair Additional
Camera?
Camera?
2
(Cam 3)
Pair Additional
3
Camera?
Unpair Camera?
4
Rename? - cam1
5.3 MULTI-CAMERA, OPERATION:
As soon as additional cameras are registered
on the parent unit, the multi-camera icon
will appear in the upper part of the display.
1. touch here to simultaneously show the
video from all registered cameras
in the example on the right, cameras 1, 2
and 3 are registered
2. at the left side in the display, the green
and red bars indicate whether the baby is
crying or not.
3. the name of the camera is shown in the
bottom left corner
4. the temperature of the concerned baby
room is shown in the bottom right corner
5. any temperature and other alerts are
shown for each camera
6. the full bar of the multi-camera icon
is transmitted, touch a screen to listen to the sound of that camera or touch the
2
icon to automatically switch to the next camera every 10 seconds
(Cam 4)
7. touch a screen 1x or 2x (depending on whether the sound is already activated,
2
see 6) to view that camera full-screen
(Cam 2)
46
1
7
6
6a
Cam 3
19°C
2
Cam 1
20°C
Cam 2
3
4
5
indicates from which camera the sound
21°C
Publicité
