Publicité
Les langues disponibles
Les langues disponibles
Talk-back function:
•
Press the Talk button on top of the parent unit to
talk back to the baby unit.
•
Keep the button depressed while talking and
release it to listen.
•
The volume at the side of the baby unit is fixed and cannot be adjusted.
Automatic brightness:
When the parent unit is set to the automatic brightness
setting, the built-in light sensor will control the display
brightness. When the surrounding becomes darker, the
brightness decreases; when the surrounding becomes
brighter, the brightness increases.
Automatic night vision:
The baby unit is provided with built-in infra-red LEDs; these LEDs switch on
automatically when the baby room becomes darker and switch off when it
becomes light again. These LEDs can illuminate objects up to a distance of
approximately 2 metres. Keep in mind that when it's dark, i.e. the night vision
LEDs are switched on, the display of the parent unit will be in black/white.
Attention: infra-red light is not visible to the human eye; this means you won't
be able to see whether the LEDs are switched on.
4.5 ADDITIONAL FUNCTIONS:
You may use the touch-screen of the parent unit to use, enable and disable
various additional functions.
Pan, Tilt and Zoom:
You may use the display of the parent unit to
remotely control the camera and to zoom in or
out:
•
make sure that the parent unit is showing the
camera image. Touch the display in a random
spot and you'll see the following:
•
press
,
, ,
to move the camera up,
down, to the left or to the right
•
touch 1x or 2x
to zoom in; touch
zoom out
•
press the Home button to exit the menu
When connecting the baby unit, make sure there's sufficient adaptor cable
length for the camera to be able to move freely
Vol.
Power
Mute
Vol.
Power
Mute
to
Home
Night light, lullabies and stars projection:
touch
to display the menus of
these 3 functions in the display
Talk
Talk
Night light menu (see illustration on the right):
1. touch or swipe here to switch the night
light on or off
2. touch here to set the brightness level
3. here you may choose whether the night light
must remain lit continuously or must switch
off automatically after a preset time period
4. if the timer (see 3) is enabled, here you
can set after how many minutes (up to 60
maximum) the night light must switch off in
increments of 5 minutes
now touch the desired menu:
night light menu lullabies menu stars projection menu
Press the Home button to exit the menu and to return to the standard display. You
may also switch the night light on or off by pressing the
Lullabies menu (see illustration on the right):
1. touch here to switch the lullabies on or
off
2. touch here to repeatedly play the
selected song or melody (see 7) or
to play all songs or melodies from
the selected category (see 6) one
after the other
3. here you may adjust the playback
volume for the baby unit
4. here you may determine whether the lullabies must be played continuously or
must be stopped automatically after a preset time period
5. if the timer (see 4) is enabled, here you can set after how many minutes (up to
60 maximum) the lullabies must be stopped in increments of 5 minutes
6. here you may select the lullaby category
7. here you may select the desired song or melody
Press the Home button to exit the menu and to return to the standard display.
You may also enable or disable playback of the lullabies by pressing the
on the baby unit.
42
now touch the desired menu:
night light
lullabies
stars projection
menu
menu
menu
1
2
3
4
button on the baby unit.
6
7
4
5
button
1
2
3
Publicité
