Publicité
Les langues disponibles
Les langues disponibles
Important: If you are not a trained motorcycle mechanic stop now. Ask
a local motorcycle shop to do the work for you.
Proposed bar:
Length of brake-lines:
Code for cable routing:
in front of the
behind the fork
Throttle cable:
Clutch cable:
Choke cable:
The clutch hose needs to be replaced by the enclosed steel braided hose.
Use clamp, spacerØ15mm and boltM6X25 to mount the hose next to the
Lengthen the electrical connection of the horn with the cable-tree.
Modify the small piece of metal that prevents the brake hose from twisting.
You can choose between removal or between modification. Mount the brake
lines from the pump to the calipers and make sure that you use a new
double Banjo bolt. Secure the brake lines on the bottom yoke and on the
Loosen the fixing of the cable from the handle bar light switch units, stretch it
Cut the fairing 15mm behind the mirror mounting points to make space for
Rev. 01 19/10/2011
Fitting instruction Superbike-KitPart no.: 120H075
Model: Honda VTR 1000 F
Type : SC36
Superbike-Kit Fitting instructions.
F
fork
B
Cut the faring.
Instructions:
steering head.
side of the mudguard using the clamps.
a little and then secure it again.
the handlebar.
LSL-Motorradtechnik GmbH • D-47809 Krefeld
www.lsl.eu
Please read the LSL-
A01 / E01 / L01
73 + 78 cm
Position of cable from riders position
right from steering
head
left from steering
head
B
/ R
F
/ L
F
/ R
Year: ´97
R
L
Publicité
