Fahrenheit 77007790 Guide D'utilisation page 12

ASSEMBLY INSTRUCTIONS
Read all instructions prior to assembly and use of this cooker. Connection
or disconnection of propane tank, leak testing and use must take place
outdoors in a well ventilated area only.
Examine and identify that all parts are present using the exploded
diagram (on page 3) of these instructions.
STEP 1
Insert the M6 wing screws and gaskets
on the rear burner support.
STEP 4
Screw the threaded brass fi ing of the hose to the burner. The brass orifice must not be cross
threaded onto the burner as the cooker will not function properly. Adjust air shu er to the burner
until the burner flame is as blue as possible.
Note:
a) The largest size pot for this cooker is 15 ¾" (40 CM) in diameter
and 15 ¾" (40 CM) high and the smallest size pot is 11" (28 CM) in
diameter and 14 ½" (36.8 CM) high.
b) The pressure regulator and hose supplied with the cooker must
be used.
STEP 2
Place the burner through the pot support ring.
Tighten with the two M6 wing screws.
4
STEP 3
Slide the air shu er over the air opening
at the end of the burner tube. Secure with M6
wing screw and M6 nut.