Publicité
Les langues disponibles
Les langues disponibles
Door outer side
• Outer surface: Follow the cleaning instructions for stainless steel surfaces on the
previous page.
• Outer glass: Clean the outer glass using a glass cleanser or soapy water. Rinse
and dry thoroughly. Take care not to get the gasket wet or allow moisture into
the door.
*
Burner controls
Make sure all surface burner knobs are in the OFF position.
CAUTION
• Do not clean the control knobs in a dish washer.
• Do not spray cleansers directly onto the control panel. Moisture entering the
electric circuits may cause electric shock or product damage.
NX58R9311SS_AA_DG68-00905B-00_EN+MES+CFR.indb 29
CAUTION
Do not let moisture enter the door or
contact the door gasket. Moisture may
reduce the gasket's performance.
1. Pull knobs off the control valve stems.
2. Clean the knobs in warm, soapy water.
Then, rinse and dry them thoroughly.
3. Clean the stainless steel surfaces using
stainless steel cleaner.
4. Re-attach the knobs to the control valve
stems.
Cooktop surface
The porcelain-enameled cooktop surface needs to be kept clean. We recommend
that you remove food spills immediately after they take place.
1. Turn off all surface burners.
2. Wait until all burner grates cool down,
3. Clean the cooktop surface using a soft
4. When cleaning is finished, re-install the
CAUTION
• Do not use a steel-wool pad or abrasive cleaner, which can scratch or damage the
enamel surface.
• Do not remove the cooktop surface to clean it. The gas lines leading to the burner
manifolds can be damaged, resulting in a fire or system failure.
• Do not pour water into the cooktop well while cleaning the cooktop. The water
can leak down into the range's gas and electrical systems creating a risk of
electrical shock or high levels of carbon monoxide due to corrosion of the gas
valves or ports.
• Keep oven vent ducts unobstructed. Clean vents frequently to avoid grease
buildup.
and then remove them.
cloth. If food spills run into gaps of the
burner components, remove the burner
cap and the head, and wipe up the spills.
burner components, and then put the
burner grates back into position.
English 29
2019-05-30
6:11:13
Publicité
