Publicité
®
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
DANGER
- To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled persons.
3. Use this table only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
4. Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. If the cord is damaged, have it replaced by a Steelcase dealer.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
9. For loading always put heavier items at the bottom and not near the top in order to help prevent the possibility of the furnishing tipping over.
10. To disconnect, remove plug from outlet.
WARNING
11.
Do not use this table to support televisions.
12. Each surface intended to support a load shall have a corresponding statement in the use instructions specifying the maximum intended load for that surface.
13.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
14. Children should be supervised to ensure that they do not play with the appliance.
The power socket/outlet shall be installed near the equipment and shall be easily accessible.
OPERATING INSTRUCTIONS
- Please refer to the attached Installation Instructions and the provided User Guide.
USER-MAINTENANCE INSTRUCTIONS
- The receptacle power block is equipped with a circuit breaker that will shut off power in an overload condition. Press to reset the circuit breaker to restore power.
POLARIZED PLUG INSTRUCTIONS
- To reduce the risk of electrical shock, this furnishing has a polarized plug (one blade is wider than the other) like the plug illustrated in Figure 1. This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. This product is for use on a nominal 120-V circuit.
No adapter should be used with this product.
SERVICING OF DOUBLE-INSULATED PRODUCTS - In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor is a means for
grounding to be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done only by qualifiedservice personnel. Replacement parts for a double-insulated
product must be identical to the parts they replace. A double-insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED." The symbol (square within a square) is also able to be marked on the product .
DANGER
- Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with circuit connectors and connected to the
GROUNDING INSTRUCTIONS
-
equipment-grounding terminal or lead on the product. Connect to only one supply circuit. No more than 12 outlets shall be supplied by one circuit.
SAVE THESE INSTRUCTIONS
This equipment has been tested and found to comply with the limits for a class B digital device pursuant
to Part 15 for FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the
separation between the equipment and receiver. • Connect the equipment into an outlet or a circuit different
from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician
for help.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
Figure 1
Polarized Plug
Page 2 of 32
P/N 1151862001
Doc # 116517 Rev H
Publicité
