SMC Networks EZ-Stream SMC2304WBR-AG Guide D'installation Rapide page 6

Using the EZ Installation
3
Wizard
After you confirm your hardware setup and get your Internet
connection information you are ready to run the EZ 3-Click
Installation Wizard. Using the PC that was previously connected
to your broadband modem, please follow the steps below:
1. Remove the CD-ROM from the box.
2. Insert the SMC Installation CD into the CD-ROM drive.
3. The EZ 3-Click Wizard will auto-run, to begin click the
[Start EZ 3-Click Wizard] option.
9
Note: If the EZ 3-Click Installation Wizard does not start automa-
tically then you can manually launch the program by viewing
the contents of the CD ROM and double-clicking on the
[Router] Icon.
Macintosh Users!
If you are setting up this Router in an ALL Macintosh
network environment, please refer to the Manual located
in the manual folder on the CD-ROM.
The EZ 3-Click Installation Wizard is not compatible
with the Mac OS.
10