Cd Changer Mode; Switching To Cd Changer Mode; Selecting Cds; Selecting Tracks - Blaupunkt Lexington C32 Mode D'emploi Et De Montage

CD changer mode

You can connect a CD changer to the
Lexington C32 unit. You can obtain
further information on available CD
changers from your dealer.
Note:
Information on handling CDs,
●
inserting CDs and operating the
CD changer can be found in the
operating instructions supplied
with your CD changer.

Switching to CD changer mode

Keep pressing the SOURCE 9
➮
button until the display shows, for
instance, "CDC 1--1".
The fi rst digit in this display represents
the CD number (in this case 1), and
the second digit represents the track
number (in this case 1).
Playback begins with the fi rst CD that
the CD changer detects.

Selecting CDs

To move up or down to another CD,
➮
press the or
or several times.

Selecting tracks

To move up or down to another track
on the current CD,
➮
press the or
or several times.
01_BA_LexStLouisC32_GB.indd Abs1:11 01_BA_LexStLouisC32_GB.indd Abs1:11
button 8 once
button 8 once
CD CHANGER MODE

Fast searching (audible)

To fast search backwards or for-
wards,
➮
keep one of the
pressed until fast searching back-
wards / forwards begins.
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
briefl y press button 3 (RPT) <.
➮
"S--RPT" appears briefl y in the dis-
play.
To repeat the current CD,
keep the 3 (RPT) button <
➮
pressed for longer than two sec-
onds.
"D--RPT" appears briefl y in the dis-
play.
Deactivating REPEAT
To stop the current track or current CD
from being repeated,
press button 3 (RPT) < until
➮
"S--RPT" or "D--RPT" disappears
and the standard CD changer
display reappears.
buttons 8
11
23.01.2007 12:19:19 Uhr 23.01.2007 12:19:19 Uhr