emerio CBC-124348.2 Mode D'emploi page 8

3. Set the current day and time (so that you can set the weekly timer function later.)
1) Let the appliance be on but not heat. Therefore, no heating symbol is illuminated on the LED display.
(Do this by setting the temperature lower than the current temperature, for example.)
2) Follow below steps in the table to set the current day and time. When using the control panel, please
press the button "M". When using the remote control, please press the button "SET".
Step Press button
1 M, or SET (3 sec.)
2 + or –
3 M / SET
4 + or –
5 M / SET
6 + or –
7 M / SET
4. Check the current day and time.
1) Let the appliance be on and heat. Therefore, the heating symbol is illuminated on the LED display. (Do
this by setting the temperature higher than the current temperature, for example.)
2) Consecutively press the button "M" (on the control panel) / "SET" (on the remote control) to check the
current day and time:
HH: day of the week;
H1: hour;
H2: minute.
More advanced functions: (Only by remote control.)
Weekly timer function
1. Follow below steps in the table to set the weekly timer.
Step Press button The LED display shows
1 WEEK (3 sec.)
2 SET
3 + or –
4 OK
5 SET
6 + or –
7 OK
8 SET
9 + or –
10 OK
11 ED
The LED display shows
HH flashes
01 to 07
H1 flashes
00 to 23
H2 flashes
00 to 59
Current temperature
UU flashes
ON or OF flashes
+ = ON: Timer function will be on. (During the set times, the
ON or OF flashes
UU
01 or 99 flashes
01 or 99 flashes
UU
U1 flashes
Select the day of the week (U1 = Monday, U2 = Tuesday, etc.)
U1 to U7 flashes
The selected day
01 flashes
It means to set the day of today.
01 = Monday, 02 = Tuesday, 03 = Wednesday, 04 =
Thursday, 05 = Friday, 06 = Saturday, 07 = Sunday.
It means to set the current hour.
It means to set the current minute.
It means the day and time are set.
heater will automatically switch on/off.)
– = OF: Timer function will be off (During the set times, the
heater will not automatically switch on/off.)
+ = 01: All timer settings will be executed only once.
– = 99: All timer settings will be executed repeatedly. [See
for which you want to make a timer.
- 7 -
Note
Choose the correct hour.
Choose the correct minute.
Note
Select:
Select:
Attention (1)].