Urmet Alpha 2Voice 1168/1 Guide Rapide D'utilisation page 5

OPENING THE DOOR USING A DOOR CODE
The page shown by the side will appear after pressing the
keypad Ref. 1168/46.
Pressing the shortcut button next to the
Then, enter the door opener code and press
The digits entered will be hidden by an equal number of * signs.
Press the shortcut button next to the
the one next to the
OPENING THE DOOR USING A TRANSPONDER KEY
Pass the transponder key near the reader on the key reader module Ref. 1168/45.
The following page will appear.
Press the shortcut menu next to the
next to the icon to open the gate.
SPECIAL CODES
To send a special code, press the 0 button on the keypad twice.
The screen shown at right appears on the display.
Enter the special code, then confirm by pressing the
INFO DISPLAY
The page shown here by the side shows the useful numbers
by pressing the shortcut button next to the
MAINTENANCE
Use a soft damp cloth to clean the front panels. Do not use products containing alcohol or window cleaning
products.
TECHNICAL SPECIFICATIONS / KEY TO SYMBOLS
Power voltage: ................................................................................................................................ 36÷48 V
(Power supplied directly by door unit ref. 1083/48 or /38 or /39 via BUS wire).
Frequency band: ..............................................................................................................................2437 MHz
Output power (Max): ............................................................................................................................ 20 dBm
Direct input voltage
DS1168-022B
icon to go back to the Home Page.
icon to open the gate. Similarly, press
icon to open the door.
icon to open the door. Press the button
icon.
button on the
to confirm.
button.
See the installation manual of the device
5