Publicité
Les langues disponibles
Les langues disponibles
Original Bedienungsanleitung FUXTEC FX-MS152 / FX-MS162_de_en_fr_ita_rev16
36.
Troubleshooting
1. Difficulties during commissioning
Situation
Spark plug
No ignition
spark
other
Compression
Weak
ignition
The carburetor does
spark
not pump oil
anymore.
regular oil supply,
but weak
compression
regular oil supply
and proper ignition
spark
Cause
Carbon deposit between the
diodes of the spark plug
Ignition coil defective flywheel
magnet too weak
Too much petrol in the combustion
chamber, bad fuel or water in the
tank
Oil line blocked
Piston rings worn, spark plug not
screwed down, cylinder head not
tight, wrong valve clearance or
ignition timing.
Poor contact between ignition cap
and spark plug
55
Solution
Clean the spark plug.
Adjust the gap
0.6~0.7mm, replace
the spark plug
Replace the ignition
coil or flywheel
Remove the spark
plug and allow to dry,
replace fuel.
Cleaning the
carburetor and
cleaning the pipes
replace screw tight to
replace or adjust
Replace or check
Publicité
