Motec MD3071A Notice De Montage Et D'utilisation page 82

9 Installation
9.1 Light protection hood
EN
On the MD3071A, the light protection hood is fixed to the monitor casing with 4
M4 screws at the factory. It can be removed if required.
9.2 Fixing the monitor
The monitor should be fitted to the mount supplied. The monitor set is available
in 4 models:
MD3071A with splay foot
MD3071A-MH-1 with RAM holder
(large)
82
MD3071A-VK with ball-bearing
MD3071A-MH-3 with RAM holder
(small)