Publicité
Les langues disponibles
Les langues disponibles
General information about operating instructions
Thank you for your confidence in AMETEK Motec products. We develop and ma-
nufacture our products with the greatest possible care. If you have any questions
with regard to the product, putting it into service, or its operations, or should the
product not meet your expectations, please feel free to talk to us about it at any
time.
Please read the operating manual in full and attentively before using the product.
It must be retained for later use. Our products are subject to continuous further
development. Motec GmbH reserves the right to make changes to the product
without prior notification.
1
Product description
The TFT monitor MD3071A is used for fullscreen display of up to 3 video sources
on vehicles and mobile machines. By connecting up to 2 cameras and a video
control unit, the driver - operator is able to see working areas which are not di-
rectly visible. The video sources can be switched manually or using control lines.
1.1
Important information about the product
Make certain based on the information on the monitor rating plate that the device
type matches these operating instructions. For further instructions, please con-
sult the operating instructions for the connected cameras or video control units.
1.2
Declaration of conformity
As the initial vendor within Europe, we have conducted an evaluation of con-
formity for our products in accordance with EU directives and legal regulations
based on the requirements of the relevant "harmonised standards". You will find
the CE mark on the product and also on the accompanying product documenta-
tion. We will be happy to provide you with a separate EC Declaration of Confor-
EN
53
Publicité
