Motec MD3071A Notice De Montage Et D'utilisation page 74

EN
74
 Press the "On-screen menu" button.
The on-screen menu is displayed.
 Press the "Decrease" button and select the "Trailer" line.
 Press the "On-screen menu" button to select "Trailer".
 Press the "Decrease" button and select the "SEL-22" or
"SEL-23" line for the cable you require.
 Press the "On-screen menu" button and check the box.
 Press the "Decrease" button and select the "Exit" line.
 Press the "On-screen menu" button.
This exits the on-screen menu. If no buttons are pressed,
then the menu automatically exists after about 10 seconds.
Traction unit alone:
When reverse gear is engaged, the camera image for the
traction unit (IN-1) is displayed.
traction unit with trailer:
When reverse gear is engaged, the camera image for the trailer
(IN-2) is displayed.
 Press and hold the "Power/Video" to display the camera
image for the traction unit (IN-1) temporarily.