Simons Voss Technologies SMARTCD2.G2 Guide Abrégé page 21

Programming device
SmartCD2.G2
Modifications or further technical developments cannot be excluded and may be imple-
mented without notice.
The German language version is the original instruction manual. Other languages (draft-
ing in the contract language) are translations of the original instructions.
Read and follow all installation, installation, and commissioning instructions. Pass these
instructions and any maintenance instructions to the user.
3. Product-specific safety instructions
WARNING
Hazards from built-in lithium batteries
The programming device contains lithium batteries. Lithium batteries
are dangerous if not handled properly.
1. Do not open the programming device. SimonsVoss can replace used
2. Do not expose the programming device to temperatures above 70
3. Do not burn the programming device.
NOTE
Initial charging of the built-in batteries.
The built-in rechargeable batteries are discharged when delivered.

EN
batteries (subject to a charge).
°C.
Charge the programming device for at least three hours before using
it.
3. Product-specific safety instruc-
tions
21 / 100