Elba 1104288 - B1 Mode D'emploi page 28

SEMI-AUTOMATIC COOKING
This is used to automatically switch off the
oven after the desired cooking time has
elapsed.
There are two ways to set your oven:
1. Set the length of the cooking time by
pushing the
ton to advance, or
if you have passed the desired time
(Fig. 5.7).
2. Set the end of the cooking time by
pushing the
ton to advance, or
if you have passed the desired time
(Fig. 5.8).
AUTO and the
Then set the temperature and the cooking
programme using the oven switch and
thermostat knobs (see specific chapters).
The oven is switched on and it will be
switched off automatically at the end of the
desired time.
During cooking, the
on and by pressing the button
see the time that remains till the end of the
cooking.
The cooking program may be cancelled
at any time by pushing
Fig. 5.7
28
button and the
to go backwards
or
button and the
to go backwards
symbol will be on.
symbol remains
you can
.
At the end of the cooking time the oven
will turn off automatically, the
will turn off, AUTO will flash and a buzzer
will be sound, which can be turned off by
pushing any of the buttons except the
/ buttons.
Turn the switch and thermostat knobs to
but- zero and put the programmer onto "ma-
nual" by pressing the
Attention: After a power cut the clock re-
sets to zero and cancels the set programs.
After a power cut, three zeros will flash on
the display.
but-
Fig. 5.8
symbol
button.