Device Description; Initial Use; Usage - Beurer MG 100 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
For this reason, the massage device must only be operated as follows:
• Never operate the massage device for longer than 20 minutes (risk of overheating) and allow it to cool off
for 15 minutes before using it again.
• Never leave the device unsupervised, particularly if children are around.
• Never use the device under covers, such as blankets or pillows.
Handling
CAUTION
Switch the device off and disconnect the power supply after every use and before every cleaning.
• Make sure that all moving parts can move freely at all times.
• Make sure that no hair can get caught in the device.
• Avoid contact with sharp or pointed objects.
• Do not kink the cable.
• Make sure that the device is not too close to heat sources such as ovens, radiators or direct sunlight.

5. Device description

H
I
J

6. Initial use

• Remove the packaging and protective films from the device.
• Check the device, power supply and cables for damage.
• Connect the device to the mains power supply. The device must be switched off.
• Route the cable safely so that there is no risk of anyone tripping over it.

7. Usage

Ensure that the device is switched off before plugging in the mains cable. Switch on the device using the On/off
button. The start program starts.
The massage speed can be increased/decreased by one setting as required by pressing the "Speed" button.
You can choose between 3 different massage programs (with automatic speed settings) by pressing the
"Programs" button.
- Relax: A wave-action, relaxing massage.
- Vital: Vibrant and pulsating massage.
- Active: Penetrating and pulsating massage.
The infrared heating can be switched on in any massage program, using the "Heat" button.
Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie down and
can massage yourself or another person. The massage intensity can be altered by pressing more or less firmly
with the massage device. Do not massage a certain site of the body for longer than 3 minutes and then change
to other area of the body.
G
F
E
D
C
B
A
B
C
A
D
E
F
G
H
I
J
12
On/off button
Speed
Adjustability of massage speed
Programs
Selection of different massage programs
Heat
Infrared heating
Start
Start program
Massage speed display
Massage program
Additional handle
Massage surface with infrared heating
Interchangeable massage attachments

Publicité

Table des Matières
loading

Table des Matières