Worth Knowing; Description Of Device; Instructions For Use; Ir Heat / Ir Heat Massage - Beurer MG 40 Mode D'emploi

2. Worth knowing

Massage can be recommended as a suitable treatment as part of many forms of healthcare, fitness and
training. Besides increasing general well-being, it is helpful for muscle aches, muscle tension, circulatory
disorders and feelings of fatigue.
The additional warmth of the infrared lamp reinforces the massage effect not only by warming the surface
of the skin but also by promoting the circulation. That way the deeper layers of the tissues and muscles
are also reached.

3. Description of device

1. Pivot for massaging head
2. Rotary knob for adjusting
the angle of the handle (4 settings)
3. Slide switch
4. Infrared surface
5. Massaging surface
6. Massage fittings

4. Instructions for use

Use the sliding switch to select the desired function:
Position
0 Off
M Vibrational massage
W IR heat for deep results
W + M IR heat massage

5. IR heat / IR heat massage

Push the switch to 'W' to heat up the infrared area. This now
starts to light up. After a few minutes, it is heated up and
ready for use.
Important: If the infrared area is heated up for a relatively
long period without any skin contact, you may find the
temperature uncomfortably high. Before application, please
therefore always check the temperature of the infrared area
with your fingertips. Switching off the infrared heat briefly
can reduce the temperature.
When the temperature of the infrared area is correct, set the
switch to 'W + M'. You can now start the infrared heat mas-
sage.
All parts of the body can be reached easily thanks to the
pivoted joint of the massaging head and the possibility of
adjusting the angle of the handle. The handle can be adjust-
ed to 4 different settings by pressing the knob (Fig., no. 2).
5. 1.
4.
6.
front of body
8
2. 3.
back of body