Alto Professional STAGEDRIVE+ Guide D'utilisation Simplifié page 5

To download a PRESET- Select a PRESET using the DIAL and press ENTER.
Note: The menu page remains unchanged to allow other PRESETS to be dumped.
All the Presets data (name, configuration, parameter values, etc.) are immediately transmitted to the
units connected to the RS485 port.
Note: In order for the transfer to work, the receiving units must be able to identify and accept Incoming Dump
operations. When two or more STAGEDRIVE+ are connected, the PRESET sent by the transmitting
STAGEDRIVE+ overwrites the existing PRESET in the same memory position of the receiving STAGEDRIVE
+.
Incoming Dump
Accepts or ignores the Dump of a PRESET sent from another STAGEDRIVE+ via the RS485 port or from a
computer via USB. Ports settings can be:
• Ignore the data that is being sent
• Accept the data that is being sent
System Protection
These indications appear when the LOCK function is enabled, (when the LOCK UTILITY system is totally (T)
or partially (P) protected against accidental or unauthorized changes). Protection is set by using a password,
without which editing cannot be achieved.
4