Makita DMR057 Manuel D'instructions page 10

or otherwise, reconnecting your device with the radio
may be necessary.
● Physical obstacles, other wireless devices or
electromagnetic devices may affect the connection
quality.
● Bluetooth connectivity performance may vary
depending on the connected Bluetooth devices.
Please refer to the Bluetooth capabilities of your device
before connecting to the radio. All features may not be
supported on some paired Bluetooth devices.
Playing audio files in Bluetooth mode
When you have successfully connected the radio with the
chosen Bluetooth device you can start to play your music
using the controls on your connected Bluetooth device.
1. Once playing has started, the volume can be adjusted
both on the radio using the Volume buttons and on
the Bluetooth device using the volume control of the
device.
2. Use the controls on your Bluetooth device to play/
pause and navigate tracks. Alternatively, control the
playback using Play/Pause, Next track, Previous track
buttons on your radio.
3. Press and hold the Fast-forward or Rewind button to
move through the current track. Release the button
when the desired point is reached.
Note:
● Some player applications or devices may not respond
to all of these controls.
● Some mobile phones may temporarily disconnect
from the radio when you make or receive calls. Some
devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or
for other reasons unrelated to audio streaming. Such
behaviour is a function of the connected device and
does not indicate a fault with the radio.
Playing a previously-paired Bluetooth
source device
If your Bluetooth device already paired with the radio
previously, the unit will memorize your Bluetooth device
and it attempts to reconnect with a device in memory
which is last connected. If the last connected device is not
available, the radio will be discoverable.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3
seconds until the Bluetooth status icon flashes on the
display or turn off Bluetooth on your Bluetooth device to
disable the connection.
You can also press the Mode button to select any mode
other than Bluetooth mode to disable the connection.
LED LANTERN/FLASHLIGHT
FUNCTION
1. Press the Light on/off button to turn on the light.
2. Select the setting as following.
● Press the Light on/off button repeatedly to select
different light modes.
● Press the Light brightness button to adjust the
suitable light brightness.
● Press the Color temperature button to select
different color temperatures.
Light mode
Lantern
Flashlight
Note:
In side-carry mode, only three sides of the lantern are
lit. When using the strap, the lantern can be positioned
as the side-carry mode to prevent the light from
blinding user's eyes.
3. Press and hold the Light on/off button to turn off the
light.
MISCELLANEOUS SETTINGS
Key lock
The key lock function is used to prevent unintentional
operation of the radio.
1. Press and hold the Lock button for 2-3 seconds until
appears on the display. All buttons except the Power
button will be disabled.
2. To release the lock, press and hold the Lock button for
2-3 seconds until
Using the strap (Fig. 6)
Using the supplied strap, you can hang the product in
different ways whenever needed. (Refer to the installation
method in Figure 6.)
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
● Do not wash the radio with water.
10 ENGLISH
Light
brightness
360˚ light
coverage High
Side-carry Low
mode
Torch mode High
Flashlight Low
disappears from the display.
Color
temperature
White
Neutral
Warm