arjo E8X Mode D'emploi page 37

Adjusting the calf position
When the thigh section is raised, the calf section can be
manually changed to the vascular (horizontal) position.
Hold the side of the calf section frame. Lift the calf section
upwards (1) until it latches (2).
1
Changing from Fowler position (left) to vascular
To return the calf section to the Fowler position:
Use the caregiver controls or ACP to lower the thigh section to
the flat position; then raise the thigh section again.
WARNING
Take care when lifting the calf section. Observe local manual handling
guidelines.
2
37