Observe Ambient Temperature And Ventilation; Installing The Spacers; Installation Dimensions And Door Opening Angle; Fixing The Door Handle - NEFF KA Série Notice De Montage Et D'utilisation

en
Observe ambient temperature and
ventilation
Ambient temperature
The climate class can be found on the rating plate. The
climate class indicates within which ambient temperat­
ures the appliance can be operated. The rating plate
is located in the refrigerator compartment at the right
side.
Climate class Permitted ambient temperature
SN +10 °C to 32 °C
+16 °C to 32 °C
N
ST +16 °C to 38 °C
T +16 °C to 43 °C
Note:
The appliance is fully functional within the room
temperature limits of the indicated climatic class.
If an appliance of climatic class SN is operated at
colder room temperatures, the appliance will not be
damaged up to a temperature of +5 °C.
Ventilation
In order to improve efficiency of the cooling system
and save energy, it is necessary to maintain good
ventilation around the appliance for the dissipation of
heat. For this reason, sufficient clear space should be
available around the refrigerator. Suggest: It is
advisable for there to be 50-70 mm of space from the
back to the wall, at least 100 mm from its top, at least
100 mm from its side to the wall and a clear space
upfront to allow the freezer door to open 130° and the
refrigerator door to open 135°.
100 mm
30
100 mm
100 mm

Installing the spacers

Remove two screws with screwdriver first, and take out
the spacers from plastic bag and fix it to the back of
the appliance through the screws then. This ensures
that there is a minimum distance between the appli­
ance and the wall.
Installation dimensions and door opening
angle
W2
D
130°
W W1
908 mm 418 mm

Fixing the door handle

Before you use the product, please check the handles
of the appliance. If a handle is loose, you should fix it
with the hexangular screwdriver in the clockwise
direction, then it can be used normally.
W
W1
135°
W2 D
277 mm 628 mm 1171 mm
D1
D1