Dolmar AG-3750 Manuel D'instructions page 8

Vibration
The vibration total
determined according to EN50636:
Work mode: operation without load
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
8
value (tri-axial vector
): 2.5 m/s or less
2
h
2
ENG900-1
For European countries only
sum)
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Blower
Model No./ Type: AG-3750
ENG901-1
Specifications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN15503
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 93.5 dB (A)
Guaranteed Sound Power Level: 96 dB (A)
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
2.9.2014
Yasushi Fukaya
Director
ENH021-8