CONTINENTAL EDISON CECTG4BD Guide D'utilisation page 61

Utensil holder, control handles
Remove the utensil holder.
Clean these brackets and control handles with a damp cloth, washing-up liquid and
warm water. For stubborn stains, soak beforehand.
Dry all these parts with a soft, clean cloth.
Upper plate support
Regularly wipe the top plate with a soft, well-wrung cloth in warm water to which a little
dishwashing liquid has been added.
Dry the top plate completely after cleaning.
Carefully remove salted food and liquids from the cooktop as soon as possible to avoid
corrosion.
Parts of the stainless steel appliance may become discolored over time. This is normal
because of high temperatures. Whenever the appliance is used, these parts must be
cleaned with a product suitable for stainless steel.
Burners
Remove the burner covers and flame spreaders by pulling them up and away from the
top plate.
Soak them in hot water and some detergent or dishwashing liquid.
After cleaning and washing, wipe and dry thoroughly. Make sure the flame holes are
clean and completely dry.
Wipe the fixed parts of the burner cup with a damp cloth and then dry them.
Gently wipe the ignition and the safety device with a well wrung cloth and wipe with a
clean cloth.
Before replacing the burners on the top plate, make sure that the injector is not blocked.
61