CONTINENTAL EDISON CECTG4BD Guide D'utilisation page 50

(A) SEALING STRIP
(C) SCREW
Do not use silicone sealant to seal the
unit against opening.
It will be difficult harder to remove the unit from
the opening in the future, especially if it needs
to be repaired.
1. Place the bracket
corresponding to the size of the screws. There are
screw holes in each corner of the cooktop (H).
Lightly tighten a screw (C) through the fastener (B)
so that the attachment is attached to the plate but
you can still adjust the position.
2. Carefully put the plate back in place and then
gently lower it into the opening you cut.
3. Under the hob, adjust the brackets to a
position that suits your work surface. Then tighten
the screws (C) to secure the cooktop in position.
50
(B) in the holes