Operation Of The Device - CONTINENTAL EDISON CECTG4BD Guide D'utilisation

Operation of the device

Warnings
■ Do not modify this unit.
■ This appliance must be installed by a qualified technician or installer.
■ Before installation, make sure that the local conditions of distribution (type of gas and gas
pressure) and the setting of the appliance are compatible.
■ The setting conditions for this unit are indicated on the label (or data sheet).
■ This appliance is not connected to a flue gas vent. It must be installed and connected in
accordance with the applicable installation rules. Special attention should be paid to the
relevant requirements for ventilation.
■ Before installation, turn off the gas and the power supply to the unit.
■ All devices containing electrical components must be earthed.
■ Make sure that the gas pipe and electrical cable are installed so that they do not touch
any parts of the appliance that may become hot.
■ The gas hose or connector must not be twisted or blocked by other devices.
■ Check the dimensions of the appliance and the dimensions of the space to be cut in the
kitchen worktop.
■ Panels above the worktop or adjacent to the appliance must be made of non-flammable
materials. The laminate coating and the adhesive used for fixing must be resistant to heat,
to prevent deterioration.
1) Turn the appliance tap to turn it on and to light each burner
2) Check for a clear blue flame without yellow tilting.
3) If the burners are defective, please check the following:
- The lids of the burners are correctly placed.
- The flame diffuser is positioned correctly
- The burner is aligned vertically with the tip of the injector
■ A complete operational test and test for possible leaks must be performed by the installer
after installation.
■ The flexible hose must be installed in such a way that it can not come into contact with a
moving part of the housing and does not pass through a space that may become congested.
■ Parts have been factory lubricated to meet all cooktop standards.
55