OPERATION - General
The appliance is intended only for domestic use, not for professional use.
17
9
11
1. Coupler
2. Tube connection
3. Coupler release button
4. Dust container lid
5. Dust container release button
6. On/off switch
7. Handle
8. Plug and cord
OPERATION - Use
1. Push the coupler (1) into the tube connection (2) on the motor unit (see figure 2A). To remove the
coupler, push the button (3) at the top of the tube connection and pull it out.
A
2. Slide the telescopic interlocking tube (15), the combi nozzle (16) or one of the other included accessories
onto the coupler (see figure 2B). When using the telescoping interlocking tube, slide the combi nozzle
or one of the other accessories onto the end of the tube.
3. Put the plug in the wall socket, and press the on/off switch (6).
4. Start vacuum cleaning. Press the on/off switch again to turn off the appliance.
1
10
12
13
9. Exhaust opening
10. Dust container
11. Dust container bottom flap release button
12. Wall mount
13. Crevice tool
14. Round brush tool
15. Telescopic interlocking tube
16. Combi nozzle
B
27
2
8
7
14
15
EN
3
4
5
6
16
1
2