Accessories - Bestron AVC800 Mode D'emploi

Masquer les pouces Voir aussi pour AVC800:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
5. Press the button on the telescopic tube
and keep it pressed in; you can then
extend or retract the tube to the required
length (see figure 3).
6. Press the foot button on the nozzle to set
the combi nozzle for use on hard or soft
surfaces (see figure 3). For use on hard
surfaces, press the foot button on the
combi nozzle to extend the brushes. Lift
the button for use on soft surfaces.

ACCESSORIES

This vacuum cleaner is supplied with two
accessory tools (see figure 4):
a crevice tool (13) with a narrow nozzle,
for cleaning radiators, window frames,
crevices, small openings, and similar;
a round brush (14), for cleaning delicate
or irregular surfaces, furniture, Venetian
blinds, and similar.
OPERATION - Storage after use
This vacuum cleaner is supplied with a wall mount (12), which can be attached to the wall using two screws.
Place the vacuum cleaner and the accessories onto the wall mount to store them neatly in a fixed place.
1. Remove the plug from the wall socket.
2. Place the vacuum cleaner and the accessories onto the wall mount (see figure 4).
CLEANING AND MAINTENANCE - Removing waste from the dust container
1. Remove the plug from the wall socket.
2. Remove the telescopic interlocking tube from the vacuum cleaner.
3. Hold the vacuum cleaner above a waste-bin.
4. Press the button (11) to open the bottom flap (10) (see figure 5).
5. If so required, use your hand to remove any waste sticking to the container.
6. Close the bottom flap, and press until it clicks into place.
A
B
28
3
C
EN
4
5

Publicité

Table des Matières
loading

Table des Matières