Operation - General - Bestron A2300E Mode D'emploi

operAtion - General

The appliance is intended only for domestic use,
not for professional use.
1. Telescopic tube
2. Hose
3. Hose connector
4. Hose grip
5. Mechanic suction pressure control
at the handle
6. Combi nozzle
7. Motor unit
8. Cover
9. Cover release button (dust bag)
10. Vacuum-cleaner handle
11. Rear wheels
12. Swivelling front wheel
13. Cord-rewind button
14. On/Off switch
15. Indicator, "dust bag full"
16. Crevice tool / Small brush / furniture
nozzle
17. Exhaust filter
18. Storage bracket
19. Vacuum suction control
20. Hard floor brush
operAtion - Before use for the first time
1. Verify that a dust bag is fitted. Fit a dust bag, if necessary. See 'Changing the dust bag'.
operAtion
1. Click the hose connector (3) into the hose opening on
the motor unit (7). To remove the hose, press on the
two release buttons on the side of the connector and
pull the connector from the opening; see Figure 2.
2. The power cord has a yellow and red mark, see
Figure 2b. Pull out the cord to the yellow mark.
Never pull out the power cord beyond the red mark.
This could damage the power cord.
3. Put the plug in the wall socket, and press the On/Off switch (13). To switch off the appliance, press the
On/Off switch again, see Figure 2c.
4. The appliance is now ready for use. You can move the vacuum cleaner while you are cleaning by
pulling on the hose grip (4). You can lift the appliance with the vacuum cleaner's handle (10), see
Figure 2e.
5. You can adjust the vacuum suction with the vacuum suction control (19), see Figure 2d. It is advisable
to reduce the vacuum suction when cleaning upholstered furniture and curtains. This will prevent the
fabric from being sucked into the nozzle (6).
note If so required, you can also reduce the suction quickly by moving the slide on the hose grip (5).
6. Slide the telescopic tubes (1) onto the hose handle, see Figure 3a.
20
13
15
8
3
9
a
e
22
user's instructions
12
18
7
16
10
19
17
14
11
Figure 1
c
d
b
Figure 2