Hach POLYMETRON 8810 ISE Manuel D'utilisation Simplifié page 6

Note: The standard analyzer POLYMETRON Model 8810 ISE for chloride measurement supplied is a low range
version (0.02 - 5 mg/L chloride). For the high range version (0.5 - 500 mg/L chloride) make sure to include in the
order the related reference electrode (item number 368483,00000) for use with the analyzer.
There is a standard panel-mounted version. A wall–mounted polyester cabinet and a free–standing
cabinet to house the analyzer with the necessary reagents are also available. Liquid modules are
installed below the electronic control unit for protection, easy access and service tasks. The hinged
panel tilts forward to access to the rear. Refer to
Figure 1 Front and rear view (panel mount illustrated)
1 Electronic unit
2 Measurement chamber (refer to
Figure 2 on page 7)
3 19 inch panel
4 Main switch
5 Peristaltic pump
6 Micro piston pump
Section 4 Measurement chamber
Refer to Figure 2 for measurement chamber components.
6 English
Figure 1
7 Space for additional pump
8 Input/Output connections
9 Reagent pump cover
10 Compressed air valve
11 Electronic unit (rear)
12 Power supply box
for product overview.
13 Power supply connection
14 Rinse valve
15 Sample valve
16 Reagent canister
17 Level detector
18 Tube weight