Publicité
Les langues disponibles
Les langues disponibles
THINGS TO CHECK BEFORE INSTALLATION
•
Does the output (kW) match the volume (m³) of the sauna room?
See Table 1.
•
In case there are any uninsulated brick, tile or glass walls in the
sauna room, an additional volume of 1,5 m³ should be added to
the sauna room for each such square meter of the wall.
•
The suitable output of the heater will be determined based on
Table 1.
•
The producer's warranty guarantee is invalid if the heater and
sauna room have been dimensioned incorrectly!
•
Minimal safe distances between the sauna room's ceiling and
walls in view of installing the electric heater are listed in Table1.
INSTALLATION
Positioning the heater
•
The heater must be positioned in such a way that there is a safe
distance between flammable materials and the external surfaces
of the heater. See Figure.
•
In installing the heater, it must be prevented that people could
have physical contact with the heater or that other dangerous
situations could emerge during the heating process.
•
Remove the protective film from the steel plate behind the
heater.
•
The method of mounting the heater must guarantee that it
remains securely on the wall. The full weight of 65 kg should be
considered upon installing the heater on the wall.
•
The DROP 9 sauna heater set includes a heat guiding device.
•
The input of the power cable is located 6,5 cm to the left of the
centre of the heater and 8 cm from the lower edge when looking
from the front (Figure 1.).
4
Publicité
