Maintenance; Spare Parts; Faults And How To Remedy; Guarantee Terms - Wolf Garten Compact plus 40 E-1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Maintenance

General
1
Attention! Rotary cutter blade
Before all maintenance and cleaning work:
pull out the power plug.
Do not touch running blades.
Cleaning
Clean mower thoroughly after each mowing with cloth or
brush.
Clean the mulch flap at regular intervals with a small
broom
.
U
Do not spray with water.
Winter Storage
Clean mower thoroughly before storing away.

Spare parts

Item number
4970 031
4970 096

Faults and how to remedy

Problem
Uneven running, heavy
vibrations in the mower
Motor will not run
Poor mowing-/ catching
When in doubt, always consult a WOLF service workshop.
Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.

Guarantee terms

Please carefully retain the guarantee card completed by the sel-
ler, or the proof of purchase.
16
Order description
Vi 40 FM
Possible cause
• Blades damaged
• Blades loose in the fastening parts
• Fuse blown
• Cable damaged:
1
Attention! Electric shock through cable damage
When the cable is cut through or damaged, the
safety fuse doesn't always trip.
Do not touch cable, before pulling out the power
plug from the socket.
Damaged cable has to be completely replaced.
Patching cable with insulating tape is forbidden.
• Blunt blades
• Catcher bag blocked
• Incorrect cutting height
• Mulch flap is closed
Have your mower thoroughly checked once a year by an ap-
proved Service Centre.
Do not store it in a wet or humid place.
Changing blades
V
For all works on blades, coupling and cutter bars, first of all,
pull out the power plug and wear protective gloves.
1
Attention!
An unbalance can develop after regrinding of the blade.
Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
Always change blades in a specialist workshop. A torque
spanner of 13 mm is mandatorily required.
Fastening torque of the screws: 16-18 N-m
Product information
Grass catcher
Replacement blade 40 cm
WOLF service-
workshop
The company WOLF-Garten provides a guarantee for 10 years from
the date of purchase. This guarantee is in accordance with the rele-
vant state of technology and the utilisation purpose / area of applicati-
on. The consumer's statutory rights are not affected by the following
guarantee guidelines.
V
.
Remedy (X) by:
Yourself
X
---
---
X
---
X
X
---
X
---
---
X
---
X
---
X
G

Publicité

Table des Matières
loading

Table des Matières