Klarstein Skyscraper 3G Mode D'emploi page 13

MODES AND SETTINGS
Natural mode: The device automatically changes the speed, starting from the speed
that is selected when the mode is activated, to emulate the natural ebb and flow of the
wind.
Sleep mode: Similar to the natural mode, the device starts at the speed that is selected
when the mode is activated and automatically changes the speed, creating a natural
wind-like ebb and flow. After every hour, the fan switches to the next lower speed level.
Upon reaching the lowest speed, it remains in this silent mode until it is switched off by
the sleep timer or manually.
CLEANING AND CARE
• Always unplug the unit before moving or servicing.
• Do not immerse the power cord, plug and the whole unit into water or rinse under
the tap!
• Do not use detergent, gasoline, benzene, thinner, or other solvents to clean the unit
to avoid damage of the appliance.
• Unplug the unit and wait until the fan stop running before cleaning.
• Use a damp cloth to clean the surface of the fan.
• Take off the Cover carefully and take out the Mesh Filter. You could wash the filter
under running water. Rinse and dry the filter before place back.
• It is not recommended to take the fan apart, except the authorized agent or any
agent qualified to undertake electrical repairs.
• If the fan will not be used for a long time, store it in the cool, dry, safety place and
far away from children. Do not store the appliance in hot place and under sunshine.
• It is recommended to clean the fan every month.
EN
13