Microfiber Pads - Steamfast SF-147 Guide D'utilisation

MICROFIBER PADS

1. Lay one Microfiber Pad on a flat surface, with white fastener
strips facing upward.
2. Align Mop Head above Microfiber Pad. Make sure Mop is
oriented with Pad as shown (Figure 1).
3. Press Mop Head firmly down onto Microfiber Pad. Fastener
strips will adhere to Pad Grips on underside of Mop Head.
The Microfiber Pad is now attached and ready for use.
4. To remove, use your foot to press down on Microfiber Pad
Release Tab (Figure 2) while simultaneously pulling the unit
up and away from Microfiber Pad (Figure 3).
WARNING: Use care when handling a recently used Microfiber
Pad, as it may still be hot.
Figure 1
White
Fastener
Strips
Figure 3
Initial Setup
Release
Tab
Release
Tab
Figure 2
English 9