Axis Q8685-E Guide D'installation page 46

AXIS Q8685-E PTZ Network Camera
2. Go to Setup > PTZ > Advanced > Device > Extended Driver Specific Settings for
Video Source 1.
3. For Illuminator > IL1 type:
— Select IR if you connected an infrared illuminator
— Select White for a white light illuminator
4. Repeat the above step for lluminator > IL2 type.
Important
These instructions apply only to device firmware v8.40 or later.
1. Go to the product's web page.
2. Go to Settings > System > Accessories.
3. For Illuminator > IL1 type:
— Select IR if you connected an infrared illuminator
— Select White for a white light illuminator
4. Repeat the above step for lluminator > IL2 type.
46