Taurus Alpatec R750 Mode D'emploi page 10

English
- Push 2 swivel wheels into the front holes (1) using the
pins and make sure they are secure.
- Push 2 swivel wheels into the back holes (2) using the
pins and make sure they are secure.
- Put the unit in an upright position, on the wheels.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been
removed.
- Prepare the appliance according to the function you
wish to use.
Use:
- Unroll the cable completely before plugging it in.
- Pull the water tank roughly 10 cm backwards and fill with
clean water. Do not exceed the MAX level.
-If you wish to use the humidification function, ensure
there is sufficient water in the reservoir.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off button.
-The pilot light (red) comes on.
- Select the appliance function desired.
Fan function:
Pressing on the Speed button allows you to choose a
ventilation speed.
Select a different speed each time you press: L (low) – M
(medium) – H (high). The corresponding light will then
come on.
- Pressing on the Mode button allows you to select a
method of ventilation; you can set the speed using the
'speed' button.
- Normal – gives a regular breeze
- Natural – gives a natural, irregular breeze
- Sleep – gives a natural, irregular breeze that
switches to low speed, irrespective of the fan speed
setting, after half an hour.
Timer function:
- The appliance's operating time can be controlled.
- To program the operating time simply select it using the
timer button.
- Each press on the button gives a further half hour, until
max. 7.5 hours.
- Pressing it again switches this function off. The lights
indicate the set time.
Humidify function:
- Press the ion button to activate this function.
- The corresponding light will come on.
- Pressing it again switches this function off.
Ionic function:
- The appliance can generate negative ions.
- Press the ion button to activate this function.
- The corresponding light will come on.
- Pressing it again switches this function off.
- Negative ions are useful for removing the static
electricity, smells and fumes.
R750-Notice.indb 10
Swing function:
The Swing button makes the breeze swivel from left to
right horizontally
The corresponding light will come on. Pressing it again
switches this function off. By adjusting the horizontal
panels manually, you can adjust the vertical outlet
direction.
- The oscillation function makes it possible to direct the
flow from the apparatus so that it automatically alternates
over a range of 75º
- To activate this function, press the oscillation button.
- To deactivate this function, follow the procedure for
switching it on in reverse.
Off-mode function:
- In order to save energy, the appliance passes to off-
mode after the timer turned off if the user does not use it.
- The power indicating light will keep on red indicate that
this function has activated.
- To turn it on again, you simply have to press the on/
off button.
- To return to normal operation simply press the
appliance's on/off button.
Once you have finished using the appliance:
- Turn the appliance off using the on/off button.
- Unplug the appliance from the mains.
- Empty the water tank.
- Clean the appliance.
Carry handles:
- This appliance has a handle on the side of the body,
which facilitates comfortable transport.
Safety thermal protector:
- The appliance has a safety device, which protects the
appliance from overheating.
- If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply, and wait
for approximately 15 minutes before reconnecting. If the
machine does not start again seek authorised technical
assistance.
Cleaning
- Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
- Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning
the appliance.
- Do not let water or any other liquid get into the air vents
to avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- If the appliance is not in good condition of cleanliness,
its surface may degrade and inexorably affect the
14/12/2015 10:06